Chungear Industrial Co Ltd CE10711 Manual Do Utilizador
Model # JY1126+TR205E (with light function)
DC POWER CEILING FAN REMOTE CONTROL MANUAL
□
INSTALLATION INSTRUCTIONS
NOTE:
This unit is to be used for the control of DC power ceiling fan and in an AC120V 60Hz power
supply only. Output Power: 40W (Max.) for motor and 190W (Max.) for light.
Important: Using a full range dimmer switch (not included) to control fan speed will damage the fan. To
reduce the risk of fire or electrical shock, do not use a full range dimmer switch to control fan speed.
Important: Using a full range dimmer switch (not included) to control fan speed will damage the fan. To
reduce the risk of fire or electrical shock, do not use a full range dimmer switch to control fan speed.
1. Switch power off at fuse box or circuit breaker before you begin installing the fan.
2. Make wiring connections as indicated Fig. 1.
3. Launch distance for remote control: about 10m.
4. Open the remote battery cover and install DC3V,CR2032,2pcs Lithium batteries. (Fig. 2)
5. CODE SWITCH: Codes are set by pushing dip switches up or down. It is imperative that the code
used for both transmitter and receiver is exactly the same; otherwise remote controller will not work.
Please note the code switch will enable you to operate a second remote controller independently. For
example, if you have two ceiling fans with 2 remote control units, set 2 different codes for each set of
transmitter/receivers. This means you can operate each ceiling fan independently. Your remote control is
ready for use after battery installation.
2. Make wiring connections as indicated Fig. 1.
3. Launch distance for remote control: about 10m.
4. Open the remote battery cover and install DC3V,CR2032,2pcs Lithium batteries. (Fig. 2)
5. CODE SWITCH: Codes are set by pushing dip switches up or down. It is imperative that the code
used for both transmitter and receiver is exactly the same; otherwise remote controller will not work.
Please note the code switch will enable you to operate a second remote controller independently. For
example, if you have two ceiling fans with 2 remote control units, set 2 different codes for each set of
transmitter/receivers. This means you can operate each ceiling fan independently. Your remote control is
ready for use after battery installation.
.
□
FUCNCTIONS OF REMOTE CONTROL: (Fig. 4)
Indicator LED light: fan speed or light dimmer indicator
button: Tape once turn off the fan. Press and hold this button for 5
seconds to turn on or turn off the buzzer.
Fan speed:
Fan speed:
Turn on the fan and turn speed up.
Turn on the fan and turn speed down.
Turn on the fan and turn speed down.
Light button: Turn on or off the light.
Increase light output level.
Decrease light output level.
Decrease light output level.
(Tungsten only and light function select switch on dimmer position.)
Sleep Timer:
Fig. 1
Fig. 4
Fig. 2
Fig. 3
TR205E