Hi Tron Systems Inc NDT72 Manual Do Utilizador

 

36

 SMTP(E-Mail) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The Network Camera can be configured to send event and error email messages via SMTP (Simple 
Mail Transfer Protocol). 
 
•   SMTP(E-Mail) Setting 
 

Select “Enable” to activate the SMTP operation. 

 - Mail Server / Port: Enter the host names (or IP addresses) and port numbers for your   
 

 

mail server in the fields provided, to enable the sending of notifications and image email   

 

 

messages from the camera to predefined addresses via SMTP. 

 - Sender: Enter the email address to be used as the sender for all messages sent by the   
 

 

Network Camera. 

 - 

 

Interval: Represents the frequency of the email notification when an event occurs. 

 - 

 

Aggregate events: Shows the maximum number of emails sent within each interval. 

If your mail server requires authentication, check the box for Use authentication to log in to this 
server and enter the necessary information. 

Enter the User Name and Password as provided by your network 

 

 

administrator or ISP (Internet Service Provider). 

 
 

To ensure that the login procedure is performed as securely as possible when using SMTP 

 

authentication, you must define the weakest authentication method allowed.   

Set the Weakest method allowed to the highest/safest method supported 

 

 

by the mail server. The most secure method is listed in the drop-down list: