Hi Tron Systems Inc NDT72 Manual Do Utilizador

 

70

 
To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance 
web page (described in “3.5.4 System > Maintenance”) or use the Reset button on the network 
camera, as described below   
 
 
 
 
 
 
 
 
 
 
 
 
 
•    Using the Reset Button 

Follow the instructions below to reset the Network Camera to the factory default settings using 
the Reset button. 
 

   

1.    Switch off the Network Camera by disconnecting the power adapter. 

 

2.    Press and hold the Reset button with a straightened paperclip while reconnecting the power. 

   

3.    Keep the Reset button pressed during about 2 seconds. 

   4.   Release the Reset button. 
   

5.    The network camera resets to factory defaults and restarts after completing the factory 

 

 

reset. 

 
 
 
Caution: When performing a Factory Reset, you will lose any settings you have saved. 

(Default IP 192.168.30.220)