Hi Tron Systems Inc NVT72 Manual Do Utilizador

 

14

 
Access from the internet once connected, the Network Camera is accessible on your local network 
(LAN). To access the network camera from the Internet you must configure your broadband router to 
allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which 
will attempt to automatically configure the router to allow access to the network camera. This is 
enabled from Setup > System > Network > NAT.   
 
For more information, please see “3.5.5 System>Network>NAT” of User’s Manual. 
 
 

 
 
To gain access to the product, the password for 

the default administrator user must be set. This 

is done in the “Admin Password” dialog, which is 

displayed when the network 

camera 

is accessed 

for the setup at the first time. Enter your admin 
name and password, set by the administrator. 

Note: The default administrator username is 

admin and password is admin. If the password is 

lost, the Network Camera must be reset to the 
factory default settings. See “3.8 Resetting to the 

Factory Default Settings”. 

   

   

 
 
To prevent network eavesdropping when setting the admin password, this can be done via an 
encrypted HTTPS connection, which requires an HTTPS certificate (see note below). 
 
To set the password via a standard HTTP connection, enter it directly in the first dialog shown below. 
To set the password via an encrypted HTTPS connection, see “3.5.5 System >Security>HTTPS”. 
 
 
Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between 
web browsers and servers. The HTTPS certificate controls the encrypted exchange of information.