Intel WX58BP WX58BPR Manual Do Utilizador

42 

 

1 Intruder 

2 Ground 

 

1 Control 

(Note)

 

2 +12 

V 

3 Tach 

Note: These fan headers use voltage variance control for fan speed. 

1 Ground 

(Note)

 

2 +12 

V 

3 FAN_TACH 

4 FAN_CONTROL 

Note: These fan headers use Pulse Width Modulation control for fan speed. 

This board has the following add-in card connectors: 
  PCI Express* 2.0 x16: Two PCI Express* 2.0 x16 connectors supporting 

simultaneous transfer speeds up to 8 GB/sec of peak bandwidth per direction and 
up to 16 GB/sec concurrent bandwidth. 

  PCI Express* 2.0 x4: One PCI Express* 2.0 x4 connector (implemented using a x4 

physical connector capable of accepting a x16 card). The x4 interface supports 
simultaneous transfer speeds up to 250 MB/sec of peak bandwidth per direction 
and up to 5 GB/sec concurrent bandwidth. 

  PCI Express* 1.1 x1: Two PCI Express* 1.1 x1 connectors. The x1 interface 

supports simultaneous transfer speeds up to 250 MB/sec of peak bandwidth per 
direction and up to 2 GB/sec concurrent bandwidth. 

  PCI Conventional (rev 2.3 compliant) bus: One PCI Conventional bus add-in card 

connector. The SMBus is routed to the PCI Conventional bus connector. PCI 
Conventional bus add-in cards with SMBus support can access sensor data and 
other information residing on the board. 

Note the following considerations for the PCI Conventional bus connector: 
  The PCI Conventional bus connector is bus master capable. 
  SMBus signals are routed to the PCI Conventional bus connector. This enables PCI 

Conventional bus add-in boards with SMBus support to access sensor data on the 
board. The specific SMBus signals are as follows: 
  The SMBus clock line is connected to pin A40. 
  The SMBus data line is connected to pin A41.