Intel WX58BP WX58BPR Manual Do Utilizador
Códigos do produto
WX58BPR
Intel Desktop Board WX58BP Technical Product Specification
46
2.2.2.4.2
Reset Switch Header
You can connect Pins 5 and 7 to a momentary single pole, single throw (SPST) type
switch that is normally open. When the switch is closed, the board resets and runs the
POST.
switch that is normally open. When the switch is closed, the board resets and runs the
POST.
2.2.2.4.3
Power/Sleep LED Header
You can connect Pins 2 and 4 to a one- or two-color LED. Table 19 shows the possible
states for a one-color LED. Table 20 shows the possible states for a two-color LED.
states for a one-color LED. Table 20 shows the possible states for a two-color LED.
Table 19. States for a One-Color Power LED
LED State
Description
Off Power
off/sleeping
Steady Green
Running
Table 20. States for a Two-Color Power LED
LED State
Description
Off Power
off
Steady Green
Running
Steady Yellow
Sleeping
NOTE
The colors listed in Table 19 and Table 20 are suggested colors only. Actual LED colors
are chassis-specific.
are chassis-specific.
2.2.2.4.4
Power Switch Header
You can connect Pins 6 and 8 to a front panel momentary-contact power switch. The
switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power
supply to switch on or off. (The time requirement is due to internal debounce circuitry
on the board.) You must wait at least two seconds before the power supply recognizes
another on/off signal.
switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power
supply to switch on or off. (The time requirement is due to internal debounce circuitry
on the board.) You must wait at least two seconds before the power supply recognizes
another on/off signal.