RF Ideas Inc LC80XW6 Manual Do Utilizador

Configuration Utility User Manual

P a g e

The number portions of the diagram are values that are displayed from a card.

The letter portions of the character diagram are values that are formatted by the user through the utility
and are keystroked from the device.

Wiegand to Keystroke Data Format

Strip Leading and Trailing Bit Count: By altering the numbers in the leading and trailing bit count,
users have the option to strip and discard bits from the card data. The leading and trailing bit counts can
be set to range from 0 to 15.

Send FAC (Facility Access Code): Allows for option to display the FAC code.

Send FAC as Hexadecimal Number: Sends FAC as a hex number. The default is set to output as a
decimal.

Send ID: Keystrokes out the ID portion of the card data.

When the Send ID option is checked, the defined ID field bit counts that are entered will be used.
When it is unchecked, all non-parity bits are used.

Send ID as Hexadecimal Number: Sends ID as a hex number. The default is set to output as a
decimal.

ID Field Bit Count: Sets the number of bits in the ID field from 0 to 80.

Fix length FAC/ ID Fields: Makes the FAC and ID a fixed length.

FAC Digits: Alters the FAC output by forcing a set length of digits, between 0 and 32, to be displayed.

ID Digits: Alters the ID output by forcing a set length of digits, between 0 and 32, to be displayed.

Advanced Settings

Only Read Cards With This Bit Count: Filters out cards that are not the specified bit number. The bit
number is specified in the box to the right and can range from 2 to 255 bits.

Display Hex in Lowercase: Displays hex in lowercase format.

The Send FAC as Hexadecimal or Send ID as Hexadecimal must first be selected before Display
Hex in Lowercase option can be provided.

Use Numeric Keypad: Defines which keypad will be used (whether across the top or with keypad).