RF Ideas Inc R8XXEA Manual Do Utilizador
OEM RFID Module Installation Guide
1. Place laptop upside down on a clean surface, remove all screws and back
cover to expose the inside of the laptop.
2. Remove battery pack as shown below.
3. Remove the liner under the antenna and module to expose the adhesive. Place antenna
under the open square area under the middle of the laptop touchpad and massage
gently to ensure good smooth adhesion. Route the flex cable and place the RF ID
module towards the left side of the laptop as indicated in the picture below.
gently to ensure good smooth adhesion. Route the flex cable and place the RF ID
module towards the left side of the laptop as indicated in the picture below.
4020 Winnetka Avenue, Rolling Meadows, IL 60008
(847) 870-1723 phone • (866) 439-4884 toll free • (847) 483-1129 fax