Digi International Inc XB3C1 Manual Do Utilizador
AT commands
Sleep commands
Digi XBee3 Cellular LTE Cat 1 Smart Modem User Guide
111
Parameter Description
5
Cyclic Sleep with Pin Wake. In this mode the device acts as in Cyclic Sleep but does not
sleep if the SLEEP_RQ pin is inactive, allowing the device to be kept awake or woken by
the connected system.
sleep if the SLEEP_RQ pin is inactive, allowing the device to be kept awake or woken by
the connected system.
Default
0
SP (Sleep Period)
Sets or displays the time to spend asleep in cyclic sleep modes. In Cyclic sleep mode, the node sleeps
with CTS disabled for the sleep time interval, then wakes for the wake time interval.
with CTS disabled for the sleep time interval, then wakes for the wake time interval.
Parameter range
0x1 - 0x83D600 (x 10 ms)
Default
0x7530 (5 minutes)
ST (Wake Time)
Sets or displays the time to spend awake in cyclic sleep modes.
Parameter range
0x1 - 0x36EE80 (x 1 ms)
Default
0xEA60 (60 seconds)
SO (Sleep Options)
Set or read the sleep options bit field of a device. This command is a bitmask.
Parameter range
0x0 - 0xFFFF
Bit field:
Bit
Setting Meaning
Description
0x00 0
Connected
sleep
sleep
On compatible hardware, enters a lower power consumption mode
that maintains registration with the cellular network.
that maintains registration with the cellular network.
Set all other option bits to 0.
Default
0