Industrial Technology Research Institute IWCUOBU5 Manual Do Utilizador
Document Name:
IWCU User Guide
Version:4.10
工業技術研究院機密資料 禁止複製、轉載、外流 │ ITRI CONFIDENTIAL DOCUMENT DO NOT COPY OR DISTRIBUTE 5
2 Configuration
2.1 Initial Network Configuration
Network interfaces are configured initially as follows:
br0 (ethernet) interface up
IPv4 address: 192.168.10.30
Mask : 255.255.255.0
wave0 interface up
Channel number: 178 (5890 MHz)
IPv4 address: 192.168.2.30
Mask : 255.255.255.0
wave1 interface up
Channel number: 0
IPv4 address: 192.168.3.30
Mask : 255.255.255.0
2.2 Cmd Interface
2.2.1 Network Configuration
User can place your own startup commands in /etc/config/startup.sh to set network configuration
or continue run your programs in the background and the first line of your own startup.sh must be “sh
/usr/local/startup.sh”.You should pay attention to “System will come to a halt owing to the failure to
do this”.
2.2.1.1 Ethernet Configuration Setting
User can use the command dsrc-ifset to set the Ethernet/Wireless device’s IP address and netmask.
dsrc-ifset <device> <IP> up|down