Hollywog LLC HWOGTENS11 Manual Do Utilizador

User Manual

WiTouch Pro Device
1.  Using the provided screwdriver, remove

the back cover from the WiTouch Pro 

device. 

2.  Remove the clear plastic tab from the

remote control.

3.  On the remote control, press and hold

the (+) and (-) buttons simultaneously

until the LED appears solid green 

(~ 10 seconds). 

4.  Quickly insert the batteries into the 

WiTouch Pro device.

 The LED on the remote control

will flash several times indicating 

syncing is complete. 

5.  Replace the back cover on the device.

 You may need to re-sync your  

remote control and WiTouch Pro device 

when you replace the battery in the 

remote control. This will ensure communi-

cation between your remote control and 

WiTouch Pro device. If your remote control 

and WiTouch Pro device ever lose 

communication, please repeat these 

syncing instructions.

Hollywog

2830 Amnicola Hwy

Chattanooga, TN 37406 USA

+1 423 305 7778

info@hollywog.com

www.hollywog.com/witouchpro

® and © 2015 Hollwog, LLC. All rights reserved.

U.S. Patents 8,972,016, D712,052, D701,610,

D716,958. Other U.S. & Foreign Patents Pending

11S.1004J      09/30/2015