Wave Wireless Networking SLSC5800 Manual Do Utilizador
SC5800 User Manual
106
13 APPENDIX E: FIXED ANTENNAS
The table below identifies the distances where the 1mW/cm
2
exposure limits may be exceeded during
continuous transmission using the proposed fixed antennas.
Manufacturer Type
Model
Gain
(dBi)
Numeric
gain
Channel Peak Power
(mW)
Calculated
Distance (m)
Minimum RF Exposure
Separation Distance
(m)
Gabriel
Dish
SSSP2 52B
29.0
794.3
3
239.9
1.2
2
Gabriel Flat
panel
DFPD1-52 23.9 245.5 3 239.9
0.7
2
MTI Flat
panel
MT-20004 28.0 631.0
3
239.9
1.1
2
WARNING: It is the responsibility of the professional installer to ensure that when using the outdoor
antenna kits in the United States (or where FCC rules apply), only these antenna configurations shown in
the table in section 1.4 are used. The use of any antenna other than those listed is expressly forbidden in
accordance to FCC rules CFR47 part 15.204.
antenna kits in the United States (or where FCC rules apply), only these antenna configurations shown in
the table in section 1.4 are used. The use of any antenna other than those listed is expressly forbidden in
accordance to FCC rules CFR47 part 15.204.
FCC Radiation Exposure Statement
i)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
when installed as directed. This equipment should be installed and operated with fix -mounted
antennas that are installed with a minimum of 2 meters of separation distance between the antenna
and all persons body during normal operation and the antennas as shown above.
when installed as directed. This equipment should be installed and operated with fix -mounted
antennas that are installed with a minimum of 2 meters of separation distance between the antenna
and all persons body during normal operation and the antennas as shown above.