ZyXEL AAM-1212-53 91-004-584001B Manual Do Utilizador

The IES-1000 supports the new-generation G.SHDSL.bis service at up to 4096kbps symmetrically in a single pair to serve end customers, and it comes with 

two 100Mbps Ethernet interfaces toward Ethernet aggregation network. One IES-1000 can accommodate two SAM1216-22 modules to support up to 32 

SHDSL connections. In addition, the SAM1216-22 supports ITU G.991.2 m-pair bonding in a physical layer manner. The m-pair bonding can be 2 or 4 pairs and 

the aggregated maximum payload rate is around 16Mbps.

The entire IES-1000 system can be administrated remotely with the Windows-based NetAtlas Access EMS (Element Management System) based on the 

SNMP-manageable SNMPc platform. NetAtlas Access EMS provides powerful advanced remote management capabilities that help service providers 

minimize daily operational costs. Its loop-back design helps isolating network problems while the new firmware and IP Express configuration features allow 

changes to be done remotely, eliminating the need for “truck rolls” in order to provision new customers or to reconfigure services for existing customers.

•  Delivery of Ethernet in the first mile using 

legacy LAN technologies

•  End-to-end provisioning by offering DSL circuit 

configuration through NetAtlas Access EMS 

•  Support expandable configuration with plug-

and-play line cards

•  SNMP v1, v2 manageable

• Web management

•  FTP/TFTP for firmware upload

•  Console port configuration (RS-232)

•  Telnet configuration and monitoring

•  Spanning tree algorithm (802.1D) for loop free 

connection

•  802.1Q VLAN aware bridging

  -  IGMP snooping supports multicast traffic

  -  QoS support with 802.1p

  -  DHCP relay agent option 82

 - Port 

isolation

  -  256 static VLAN entries (full-range VLAN ID  

   1 ~ 4094)

  -  4 K MAC address entries

•  Packet prioritizing per 802.1p (QoS)

  -  Static configuration—default priority setting

  -  4 priority queues per PVC (up to 4 PVCs)

• Multicast

  -  IPv4 multicast forwarding (through L2 MAC)

  -  Static multicast membership configuration

  -  IGMP v1, v2 snooping & IGMP proxy mode  

   support 

 - Shared 

VLAN 

multicast

  -  256 multicast groups and each group can  

   contain 18 members

  -  IGMP filtering profile

  -  IGMP count limiting

 - MVLAN

  -  DSL port multicast bandwidth control 

• Management support

  -  CLI-based management from  

 

 

   console/Ethernet  port

  -  SNMPV1,v2 and telnet through Inband    

   Ethernet interface and NetAtlas Access, PC- 

   based EMS management support

  -  Web-based management through Inband  

   Ethernet  interface

  -  Secured Host: configure remote host IP    

   addresses for management

 - UNIX 

syslog

  -  F/W upgrade, configuration backup & restore  

   via FTP and Web

  -  Text-based configuration file support

 - Port 

configuration

 - Alarm/Status 

Surveillance

 - Performance 

monitoring 

  -  Security and Memory Backup

 - Self 

diagnostics

 - Remote 

reset

  -  EMS Management support

• MIB

  -  SNMP MIB II (RFC1213)

 - SNMP 

v1

 - SNMP 

v2

  -  RFC1493 Bridge MIB

  -  RFC1643 Ethernet MIB

  -  RFC1757 Four group of RMON

 - RFC2674

  -  RFC2662 ADSL line MIB

  -  RFC4319 (formerly RFC3276) SHDSL Line MIB

•  19” 1U rack mountable, 2 card slots chassis

•  2 line cards to accommodate different types of 

DSL services as well as Ethernet traffic

•  Fully hot-swappable design

•  Support 8 to 32 ports in MDU/central office 

environment

•  Temperature monitoring and alarm

•  Auto-shutdown for over temperature 

•  Surge protection to prevent lightning damage

•  One Telco 50 connectors for 12-port 

ADSL/ADSL2/ADSL2+ and splitter card over POTS

•  One mini RJ11 console port for local 

management

•  Two 10/100Base-TX for uplink

•  DELT (Dual Ended Loop Test)

•  SELT (Single End Loop Test)

•  Power enhancement or ADSL power saving mode

• Rate adaptation

•  Status LEDs: System Status, Ethernet 1 and 2 Link 

Status, Ethernet 1 and 2 Active Status, ADSL ports 

status, Alarm

• ADSL Compliance

  -  DMT T1.413, issue 2

  -  G.DMT (ITU G.992.1)

  -  G.LITE (ITU G.992.2)

  -  G.HS (ITU G.994.1)

  -  Auto-negotiating rate adaptation

  -  ADSL2: G.992.3 Annex A, G.992.3 Annex L (RE-   

   ADSL), Annex M

  -  ADSL2+: G.992.5 Annex A, Annex M