Cameo Communications Inc DSLR2001N Manual Do Utilizador
Setup
TRENDnet
DSLR-2001N
25
Chapter 5: Setup
The Setup menu allows you to configure the Internet connection of
your Modem Router manually.
your Modem Router manually.
5.1
Internet Setup
The Internet Setup page is divided
into three sections: Internet
Connection Settings, Internet
Settings, and Protocol.
into three sections: Internet
Connection Settings, Internet
Settings, and Protocol.
To access the Internet Setup page,
click SETUP > Internet Setup.
click SETUP > Internet Setup.
Internet Connection
Settings
Settings
This setting configures the Modem
Router to your Internet connection.
The required settings should be
obtained from your ISP.
Router to your Internet connection.
The required settings should be
obtained from your ISP.
Internet Connection — Select the
Permanent Virtual Circuit (PVC).
The Modem Router supports up to 8
PVCs.
Permanent Virtual Circuit (PVC).
The Modem Router supports up to 8
PVCs.
Enable — Select whether to enable
or disable the Internet connection.
or disable the Internet connection.
VPI — Enter the Virtual Path
Identifier (VPI) provided by your
ISP. The default VPI is 8.
Identifier (VPI) provided by your
ISP. The default VPI is 8.
VCI — Enter the Virtual Channel Identifier (VCI)) setting provided
by your ISP. The default VCI is 36.
by your ISP. The default VCI is 36.
Encapsulation — Select LLC (Logical Link Control) or VCMUX
(Virtual Circuit Multiplexing), according to your ISP.
(Virtual Circuit Multiplexing), according to your ISP.
ATMQoS — Select the type of ATM Queue of Service (ATMQoS)
specified by your ISP. Options are: UBR (Unspecified Bit Rate),
CBR (Constant Bit Rate), VBR-nrt (Variable Bit Rate non-real-time),
and VBR-rt (Variable Bit Rate real-time).
specified by your ISP. Options are: UBR (Unspecified Bit Rate),
CBR (Constant Bit Rate), VBR-nrt (Variable Bit Rate non-real-time),
and VBR-rt (Variable Bit Rate real-time).
Peak Cell Rate — This is the maximum rate of cells that you can
send. If provided by your ISP, enter the rate in the field.
Otherwise, leave this field to its default setting.
send. If provided by your ISP, enter the rate in the field.
Otherwise, leave this field to its default setting.
Enable Default Vlan — Select whether to enable or disable VLAN
tagging.
tagging.