Cameo Communications Inc DSLR2001N Manual Do Utilizador
Advanced
TRENDnet
DSLR-2001N
51
IP/PPP Config
This page allows you to create multiple Wide Are Networks (WAN)
and manually add an IP or a PPP connection.
and manually add an IP or a PPP connection.
To access the IP/PPP Config page, click Advanced > Multi-WAN >
IP/PPP Config or click the WAN Config button.
IP/PPP Config or click the WAN Config button.
To add an IP or PPP connection, do the following:
1.
Click the Add button of the connection that you want to add.
2.
On the Interface field, select the PVC.
3.
Enter the connection settings. The screen and the required
settings vary depending on the type of connection that you
want to add. See “Protocol” on page 26 for more information.
settings vary depending on the type of connection that you
want to add. See “Protocol” on page 26 for more information.
4.
Click the Apply button to save your changes or click the
Cancel button to discard your changes.
Cancel button to discard your changes.
To edit an IP or PPP connection, click the corresponding
icon.
To delete an IP or PPP connection, click the corresponding
icon.
icon.
Default Route
This page allows you to change the default route of your Modem
Router.
Router.
To access the Default Route page, click Advanced > Multi-WAN >
Default Route or click the Default Route button.
Default Route or click the Default Route button.
Change Default Route — Select the connection to set as the default
route from the drop-down list.
route from the drop-down list.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.