Cameo Communications Inc DSLR2001N Manual Do Utilizador
Advanced
TRENDnet
DSLR-2001N
71
Use Dynamic DNS Service — Check this box to register this account
to the DNS server.
to the DNS server.
Service Provider — Select a service provider from the drop-down
list.
list.
☞
NOTE: Additional charges may be incurred depending on the
selected service provider.
selected service provider.
Host Name — Enter a domain name to be registered to the DNS server.
User Name — Enter the user name of your DNS account assigned by
the service provider.
the service provider.
Password — Enter the password of your DNS account assigned by the
service provider. Re-enter the password on the Confirm Password
field.
service provider. Re-enter the password on the Confirm Password
field.
Use Wildcards — Check this box to enable searching with wildcards.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
6.12 Ethernet Setting
This page allows you to set the link mode and enable flow control
for each of the four LAN ports of your Modem Router.
for each of the four LAN ports of your Modem Router.
To access the Ethernet Setting page, click ADVANCED > Ethernet
Setting.
Setting.
Check the Enable box of the LAN interface to enable the port.
Select the LinkMode from the drop-down list. Options are: Auto,
10Half, 10Full, 100Half, and 100Full.
10Half, 10Full, 100Half, and 100Full.
Check the FlowCntrl box of the LAN interface to enable flow
control.
control.
Click the Apply button to save your changes.