Bruno Independent Living Aids Inc PCB4950 Manual Do Utilizador
© 1998 BRUNO INDEPENDENT LIVING AIDS, INC.
4
PREFACE
*
ELECTRA-RIDE II trial run and determine final location
of rail.
of rail.
*
Determine the appropriate location for the remaining
Mounting Clamps and Brackets for attaching the Rail
to the stairs and loosely assemble the Clamps and
Brackets to the Stair Elevator Rail.
Mounting Clamps and Brackets for attaching the Rail
to the stairs and loosely assemble the Clamps and
Brackets to the Stair Elevator Rail.
*
Adjust and tighten the Rail Clamps and Mounting
Brackets and anchor the Mounting Brackets to the
stairs.
Brackets and anchor the Mounting Brackets to the
stairs.
*
Locate and drill holes for the top Bumper Bracket.
*
Install the top Bumper Bracket.
*
Determine where the charger will be positioned, and
install rail wire lead accordingly.
install rail wire lead accordingly.
*
Position Battery Charger at upper or lower landing and
route wire to household outlet.
route wire to household outlet.
*
Mount remote Call/Send Modules.
*
Test unit for proper operation.
*
Train customer in safe and convenient operation of
Elevator.
Elevator.
No installation is complete until the customer has been
trained to use the elevator smoothly and safely. After
demonstrating correct operation, have the customer
operate the elevator several times while you are avail-
able to answer their questions. BE SURE THE CUS-
TOMER UNDERSTANDS ALL SAFETY ASPECTS OF
USING THE ELEVATOR. Patience and thoroughness in
this phase of the installation is often rewarded with
repeat business and customer referrals.
trained to use the elevator smoothly and safely. After
demonstrating correct operation, have the customer
operate the elevator several times while you are avail-
able to answer their questions. BE SURE THE CUS-
TOMER UNDERSTANDS ALL SAFETY ASPECTS OF
USING THE ELEVATOR. Patience and thoroughness in
this phase of the installation is often rewarded with
repeat business and customer referrals.
OVERVIEW OF INSTALLATION