WJ Communications Inc. SR320 Manual Do Utilizador

 
In long range applications, asset tracking tool is used to locate the tags and write in to the tag memory or 
read from them.  
 
The TagHunter PHP uses application-specific protocols. Asset tracking is one such protocol which is 
generally used for long range tests or finding tags where the distance between tags and the antenna maybe 
more than as in a  typical warehouse portal entry way. For example, in a large hospital, if expensive assets 
need to be tracked with their location being unknown, asset tracking would be the recommended mode. 
 
The default “settings” for Asset tracking is the AT1.ifx config file. However users can modify or create any 
config from the custom window to reflect a different environment (e.g. a warehouse or an outdoor car 
parking lot etc.) as explained later in this document. 
 

 

 

1.  Find Tags (Button) 

 
This button is used to initiate the tag detection protocol / algorithm when clicked. If the config file is not 
loaded, it will not detect any tags. While in operation, clicking on Find tags again will result in unknown 
results.  
 

2.  Air Protocol (Radio Button) 

Copyright© 2006 by Intelleflex Corp.  Subject to change without notice.  This information is provided “as is,” and 
Intelleflex makes no claims of fit for purposes intended, merchantability or other.  All trademarks, service marks, trade 
names and logos are used in good faith and remain the property of their rightful owners.

  

page 8