Midland Radio Corporation PL5161 Manual Do Utilizador
13
IX MODE OPERATION AND FUNCTION SET UP
Depending on how your dealer has programmed your radio you may be able to change certain mode and functions
of your radio. Please consult your dealer regarding what functions are available with your radio.
The following information is a menu tree with brief description and display reading of how to access radio mode
functions.
All functions are accessed or turned off or on by pressing the mode button. Using the up (
of your radio. Please consult your dealer regarding what functions are available with your radio.
The following information is a menu tree with brief description and display reading of how to access radio mode
functions.
All functions are accessed or turned off or on by pressing the mode button. Using the up (
∧) or down (∨) buttons
move your radio display up and down each function feature. To exit press the PTT or wait for the radio to time out.
IX.1 POWER
ON
Power on the radio by turning the power/volume control clockwise out of detent. You will hear a confirmation
tone on power-up. When Power-on, all character and icon are displayed for around 0.7 sec. A beeps is sounded
when the radio is ready to enter normal operation mode.
tone on power-up. When Power-on, all character and icon are displayed for around 0.7 sec. A beeps is sounded
when the radio is ready to enter normal operation mode.
* When Power-On, it checks the last Memory and if data is wrong, it will indicate the below display and beep
an error tone. The radio enters normal operation with two beeps.
IX.2 CHANNEL
CHANGE
Rotate Channel Knob to select the channel among 16 channels your display will change with each channel
selection. Your channel display reading will vary depending on how your dealer programmed each channel
description.
selection. Your channel display reading will vary depending on how your dealer programmed each channel
description.
IX.3 TRANSMIT
-
Press PTT button to transmit. If PTT button is released, the radio returns to receive mode. Both TX and
RX mode are indicated by display icons.
When VOX option is set and voice is input, the radio transmits the signal. If voice input stops, the radio
maintains TX for around 2 sec. if there is no voice input, the radio returns to receive mode.
RX mode are indicated by display icons.
When VOX option is set and voice is input, the radio transmits the signal. If voice input stops, the radio
maintains TX for around 2 sec. if there is no voice input, the radio returns to receive mode.
IX.4
CHANNEL OPTION VIEW
-
In receiving mode, if the Monitor button is pressed for more than 2 sec., the RX tone option and the TX
tone option for each channel selected will display for one sec.
tone option for each channel selected will display for one sec.
IX.5 LOW
BATTERY
-
If Battery voltage goes under a predetermined value a Low Battery error message is shown for 2 sec.
The battery Icon will flash.
The battery Icon will flash.
BEEP
H
BEEP
H
BEEP
H