Given Imaging Limited PATENCYSCANNER Manual Do Utilizador
Given Imaging Ltd.
DOC-0062-02
DOC-0062-02
23
To place the batteries in the Scanner
1.
Open the battery bay by pushing the flaps toward the bottom of the Scanner.
2.
Insert 1.5V batteries into the battery bay according to the sketch inside.
3.
Verify that you placed the batteries according to the correct polarity and that the
batteries are fully seated in their place.
batteries are fully seated in their place.
4.
Close the battery bay and make sure the flap is closed and secured by its clasps.
Note
It is recommended to remove the batteries when you know that
you are not going to use the M2A Patency Scanner for a long
period of time.
you are not going to use the M2A Patency Scanner for a long
period of time.
Push here toward
the bottom of the
Scanner to release
the flap.
Scanner to release
the flap.
Battery Bay