Adtran TRACERT1L7 Manual Do Utilizador
61280.003L1-1B
P
AGE
9
4/12/99
AC/DC P
OWER
The unit receives power via one of two connectors. Power for the
entire system is provided by these interfaces. The three-pin circular
DIN connector is provided to connect an optional ADTRAN
desktop AC adapter (ADTRAN part number 1360.DSK24VL1),
providing 24 volts DC. The three-pin terminal block allows the
connection of any DC power source providing between 21 and 56
volts DC. The power consumption of the entire system is 30 watts.
entire system is provided by these interfaces. The three-pin circular
DIN connector is provided to connect an optional ADTRAN
desktop AC adapter (ADTRAN part number 1360.DSK24VL1),
providing 24 volts DC. The three-pin terminal block allows the
connection of any DC power source providing between 21 and 56
volts DC. The power consumption of the entire system is 30 watts.
C
ONTROLS
AND
I
NDICATORS
The system may be configured via the front panel, which is
accessible behind a drop-down panel on the right half of the BBP.
The front panel is illustrated in the figure below.
accessible behind a drop-down panel on the right half of the BBP.
The front panel is illustrated in the figure below.
T
RACER
D
ESCRIPTION
Figure 1-6. BBP Front Panel (with door closed)
Figure 1-7. BBP Front Panel (with door open)
Options that are set from the front panel can be overridden via
the terminal interface. As a rule, a green LED indicates a good
situation, a red LED indicates an error situation, and a yellow LED
indicates a configuration option. LEDs indicating overall system
integrity are listed below.
the terminal interface. As a rule, a green LED indicates a good
situation, a red LED indicates an error situation, and a yellow LED
indicates a configuration option. LEDs indicating overall system
integrity are listed below.
Test .............. Red indicates that the self-test has completed and
failed
PWR ............. Green indicates that DC voltage is applied