Adtran TRC6320 Manual Do Utilizador
612806320L1-1A
Copyright © 2005 ADTRAN, Inc.
101
DLP-5
Updating the Firmware Using TFTP
Introduction
The TRACER 6000 Series split system supports firmware updates using TFTP or XMODEM. Use the
TRACER 6200 10/100BaseT/TX
TRACER 6200 10/100BaseT/TX
MGMT
Ethernet port and TFTP from a network server or XMODEM (if
your Telnet client supports file transfers), or use XMODEM and the
CRAFT
interface. This DLP provides
the steps for a successful firmware upgrade using the 10/100 BaseT/TX
MGMT
Ethernet port and a TFTP
server. (See DLP-6, Updating the Firmware Using XMODEM on page 105, for instructions on using
XMODEM.)
XMODEM.)
Tools and Materials Required
•
A PC with Telnet client software
•
A TFTP server accessible on the network
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.