Adtran TRC6410 Manual Do Utilizador

Section 7  MIBs

TRACER 6000 Series Integrated System Manual

 114

Copyright © 2005 ADTRAN, Inc.

612806420L1-1D

TRACER6000.mib adTRACERBPVoff

a change in the BiPolar Violation (BPV) state has 
occurred and the BPV alarm is inactive.

adTRACERRAoff

a change in the Frame RA (Remote Alarm) state has 
occurred and the RA alarm is inactive.

adTRACEROOFoff

a change in the Out Of Frame (OOF) state has 
occurred and the OOF alarm is inactive.

adTRACERCVoff

a change in the Code Violation (CV) state has 
occurred and the CV alarm is inactive.

adTRACERCRCoff

a change in the Cyclic Redundancy Check (CRC) 
state has occurred and the CRC alarm is inactive.

adTRACERmfLOFoff

a change in the Loss of Multiframe (LOMF) state has 
occurred and the LOMF alarm is inactive.

adTRACERmfLOSoff

a change in the Multiframe Loss of Signal (LOS) 
state has occurred and the Multiframe LOS alarm is 
inactive.

adTRACERmfAISoff

a change in the Multiframe Alarm Indication Signal 
(AIS) state has occurred and the Multiframe AIS 
alarm is inactive.

adTRACERmfRAoff

a change in the Multiframe Remote Alarm (RA) has 
occurred and the Multiframe RA alarm is inactive.

adTRACERlineLoopbackOff

a change in the line loopback state has occurred and 
the line loopback is inactive.

adTRACERlinkLoopbackOff

a change in the link loopback state has occurred and 
the link loopback is inactive.

adTRACERLinkDown

the RF link is down.

adTRACERLinkUp

the RF link is up.

adTRACERRFCLinkDown

the RFC link is down between the Indoor Unit (IDU) 
and Outdoor Unit (ODU). This trap only applies to 
TRACER split systems.

adTRACERRFCLinkUp

the RFC link is up between the IDU and ODU. This 
trap only applies to TRACER split systems.

adTRACERRxLow

the receive level is within 10 dB of sensitivity and the 
RF Low alarm is active.

adTRACERRxLevel

a change in receive level has occurred and the 
receive level is within normal range.

adTRACERcurrThrsESon

the threshold for current Errored Seconds (ES) has 
been exceeded.

adTRACERcurrThrsESoff

the threshold for current ES has not been exceeded.

adTRACERcurrThrsSESon

the threshold for current Severely Errored Seconds 
(SES) has been exceeded.

adTRACERcurrThrsSESoff

the threshold for current SES has not been 
exceeded.