Adtran TRC6420 Manual Do Utilizador
Section 5 User Interface Guide
TRACER 6420 System Manual
48
Copyright © 2005 ADTRAN, Inc.
612806420L1-1A
C. RF Status
A graphical indicator of the RF links is located beneath the Elapsed Time display. The status of the
received radio link is indicated as
received radio link is indicated as
RF U
P
or
RF D
OWN
for each direction. This RF status display
corresponds to the
RF DWN
LED on the front of the unit.
D. Remote System Status
The right portion of the TRACER 6420 System Status menu page reports the status of the remote
TRACER 6420 (the system across the wireless link from the active terminal). If the RF link is down in
either direction,
TRACER 6420 (the system across the wireless link from the active terminal). If the RF link is down in
either direction,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the remote system status information.
E. Local System Status
The left portion of the TRACER 6420 System Status menu page reports the status of the local
TRACER 6420 (the system where the active terminal is attached).
F. Frequency Plan
Displays the frequency plan (A or B) for the TRACER 6420 unit. For an operational TRACER 6420
system, you should have one A and one B frequency plan.
system, you should have one A and one B frequency plan.
G. Rx Quality
Displays an indicator of receive signal quality that is not necessarily related to receive signal level (for
both the local and remote units) using a series of symbols (
both the local and remote units) using a series of symbols (
#
). The more symbols displayed, the better
the signal quality. This indicator is related to signal-to-noise ratio and features a colon (:) marker to
indicate 10
indicate 10
-6
bit error rate. This indicator is useful as a diagnostic tool to help identify interference, as
the system may have high receive signal level and poor signal quality in situations where interference
is an issue.
is an issue.
H. Rx Power
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols
(
(
#
). The more symbols (
#
) displayed, the stronger the signal. If the link is down in either direction and
remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the symbols (
#
).
I. Tx Power
Displays the approximate transmitter levels (for both the local and remote units) using a series of
symbols (
symbols (
#
). The more symbols (
#
) displayed, the stronger the signal. If the link is down in either
direction and remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the symbols
(
#
).
J. Navigation Reminders
Displays system navigation reminders. For more details on system navigation, refer to Navigating the
Terminal Menu on page 45.
Terminal Menu on page 45.
Q
UAD
E
THERNET
S
WITCH
M
ODULE
A visual status of current errors/alarms on the Ethernet interfaces (for both the local and
remote systems) is provided on the TRACER 6420 System Status menu page. The
configured data rate (on the Datapath Provisioning page) is displayed. Individual status
notations for the available Ethernet interfaces are available through the Quad Ethernet
Switch Module Status page.
remote systems) is provided on the TRACER 6420 System Status menu page. The
configured data rate (on the Datapath Provisioning page) is displayed. Individual status
notations for the available Ethernet interfaces are available through the Quad Ethernet
Switch Module Status page.