Adtran TRC6420 Manual Do Utilizador
TRACER 6420 System Manual
Section 5 User Interface Guide
612806420L1-1A
Copyright © 2005 ADTRAN, Inc.
69
> F
IRMWARE
U
PGRADE
U
TILITY
> F
ILE
X
FER
M
ETHOD
Lists the available transfer methods for updating the TRACER 6420 system. The following selections are
available:
available:
> F
IRMWARE
U
PGRADE
U
TILITY
> TFTP S
ERVER
(Available for TFTP transfers only.) Configures the IP address of the TFTP server on which the update file
resides. The TRACER 6420 uses this field to locate the network TFTP server and request the file transfer.
resides. The TRACER 6420 uses this field to locate the network TFTP server and request the file transfer.
> F
IRMWARE
U
PGRADE
U
TILITY
> TFTP F
ILENAME
(Available for TFTP transfers only.) Specifies the name of the update file to retrieve from the TFTP server.
Enter the full filename for the file. Some TFTP servers require the full path name for any file not located in
the default directory. Refer to the TFTP software documentation for more details.
Enter the full filename for the file. Some TFTP servers require the full path name for any file not located in
the default directory. Refer to the TFTP software documentation for more details.
> F
IRMWARE
U
PGRADE
U
TILITY
> U
PGRADE
D
ESTINATION
Specify the unit to upgrade. The following options are available:
> F
IRMWARE
U
PGRADE
U
TILITY
> C
OMMAND
Use this command to start (
S
TART
) or stop (
A
BORT
) a firmware upgrade. For XMODEM updates, cancel
the process via the terminal emulation software (consult your documentation for the information on how to
do this). For TFTP updates, you can cancel the process by selecting
do this). For TFTP updates, you can cancel the process by selecting
A
BORT
from this field.
> F
IRMWARE
U
PGRADE
U
TILITY
> L
OCAL
C
URRENT
S
TATUS
(Available for TFTP updates only.) Indicates progress or problems encountered during the current upgrade
of the local unit. The field displays
of the local unit. The field displays
I
DLE
if no update is in progress or when the update is successfully
completed. At the end of a successful update, the contents of this field are copied into the Local Previous
Status. For a detailed listing of these messages, please refer to DLP-5, Updating the Firmware Using
TFTP.
Status. For a detailed listing of these messages, please refer to DLP-5, Updating the Firmware Using
TFTP.
TFTP L
OCAL
MGMT P
ORT
Upgrade the firmware using a trivial file transfer protocol (TFTP)
server that is located on the same Ethernet network as the local
system. TFTP transfers files by specifying an appropriate server
address and filename.
server that is located on the same Ethernet network as the local
system. TFTP transfers files by specifying an appropriate server
address and filename.
TFTP R
EMOTE
MGMT P
ORT
Upgrade the firmware using a TFTP server that is located on the same
Ethernet network as the remote system. TFTP transfers files by
specifying an appropriate server address and filename.
Ethernet network as the remote system. TFTP transfers files by
specifying an appropriate server address and filename.
XMODEM
Upgrade the firmware using XMODEM software on a terminal or PC
that is connected to the
that is connected to the
CRAFT
interface of the local system.
L
OCAL
IDU
Upgrade the local system.
R
EMOTE
IDU
Upgrade the remote system. When upgrading the remote system, the
upgrade file is first loaded into the local system and then transferred
over the wireless link to the remote system. The actual upgrade
process is not started on the remote system until the entire upgrade
upgrade file is first loaded into the local system and then transferred
over the wireless link to the remote system. The actual upgrade
process is not started on the remote system until the entire upgrade
file has been received.