Adtran WLAN194XF1 Manual Do Utilizador
-
12 -
(0~9, a~f) and 128 bits for 26 Hexadecimal characters (0~9, a~f).
Key index (advanced): Select 1~4 key index form the pull-down menu,
must match with the connected AP’s key index.
must match with the connected AP’s key index.
When encryption is set to WPA-PSK/ WPA2-PSK…
Network key: Enter network key at least 8 to 64 characters.
Confirm network key: Enter network key again to confirm.
Advanced
Advanced
Beacon Interval
The time between two beacons. (The system default is 100 ms.)
DTIM Period
The delivery traffic indication message (DTIM) is an element included in
some beacon frames. User can specify a value from 1 to 255 beacons.
some beacon frames. User can specify a value from 1 to 255 beacons.
Preamble
Select from the pull-down menu to change the Preamble type into Short
or Long.
or Long.
Set Defaults
Click to use the system default value.
Apply
Click to apply the above settings.
Statistics
Tx OK
Shows information of packets successfully sent.
Tx Error
Shows information of packets failed transmit after hitting retry
limit.
limit.
Rx OK
Shows information of packets received successfully.
Rx Packet Count
Shows information of packets received successfully.
Rx Retry
Shows information of packets failed transmit after hitting retry
limit.
limit.
Rx ICV Error
Shows information of packets received with ICV error.
Reset
Click to reset counters to zero.