Xmark Corporation DTG Manual Do Utilizador
RF Test Tag
RF Test Tag
USER GUIDE
USER GUIDE
USER GUIDE
983-000022-000R1.00
11
OVERVIEW
OVERVIEW
The RF Test Tag is a tool for the use of installers and administrators in the
analysis and optimization of eXI Asset Protection systems.
analysis and optimization of eXI Asset Protection systems.
The device emulates a system RFID tag when entered into a field of
protection and completes the TIF communication with the system.
protection and completes the TIF communication with the system.
The user may manually initiate an RF test message, which is transmitted
in TLM format. The test message signal level is significantly lower than
the system tags, providing a valuable aid for the adjustment of the
system receiver sensitivities and the analysis of localized performance. A
lanyard is supplied with the tag for convenience.
in TLM format. The test message signal level is significantly lower than
the system tags, providing a valuable aid for the adjustment of the
system receiver sensitivities and the analysis of localized performance. A
lanyard is supplied with the tag for convenience.
22
FUNCTIONAL
FUNCTIONAL
•
To initate the test message press the push button.
•
The green LED indicator will flash with each transmission.
•
While the pushbutton is held on, the test message is transmitted three times a second.
•
On release of the button, transmission of the RF Test Message is terminated and the tag reverts to
normal tag operation.
normal tag operation.
•
The RF Test Tag remains inactive unless entered into a field of protection or the Test Message is
initiated by the user.
initiated by the user.
eXI systems are designed to assist staff in providing a high degree of safety for people and therefore should only be used
as a component of a comprehensive security program of policies, procedures, and processes. As with every security
as a component of a comprehensive security program of policies, procedures, and processes. As with every security
system, eXI highly recommends regular system operational checks to verify functional integrity.
© 2002 eXI Wireless Systems Inc. All rights reserved. eXI, eLink, and all respective logos are either trademarks or registered trademarks or eXI Wireless
Systems Inc.
Specifications subject to change without notice.
Systems Inc.
Specifications subject to change without notice.
eXI Wireless Systems Inc. · 100-13551 Commerce Parkway, Richmond, BC Canada V6V 2L1 · Phone (800) 667-9689 · Fax (604) 207-7760 · www.exi.com
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.