Accton Technology WA4101ACCA Manual Do Utilizador
3-6
Getting Started With Access Point Configuration
Ge
ttin
g
S
ta
rte
d
With
Ac
c
e
ss
Po
in
t Co
n
fig
u
ra
tio
n
Where to Go From Here
The above procedure using the CLI configured your access point with a
Manager password, IP address, and subnet mask. As a result, with the proper
network connections, you can now manage the access point from a PC
equipped with Telnet, a web browser interface, or from an SNMP-based
network management station. The above procedure also configured the
Service Set Identifier (SSID), radio channel, and enabled wireless operation.
Your wireless clients can now access the network by setting their SSID and
radio channel to the same values used by the access point.
Manager password, IP address, and subnet mask. As a result, with the proper
network connections, you can now manage the access point from a PC
equipped with Telnet, a web browser interface, or from an SNMP-based
network management station. The above procedure also configured the
Service Set Identifier (SSID), radio channel, and enabled wireless operation.
Your wireless clients can now access the network by setting their SSID and
radio channel to the same values used by the access point.
Some basic information on managing your access point is included in the next
section. For more information on the console, web browser, and SNMP
management interfaces, and all the features that can be configured on the
Access Point 420wl, please see the Management and Configuration Guide,
which is on the Documentation CD-ROM that came with your access point.
section. For more information on the console, web browser, and SNMP
management interfaces, and all the features that can be configured on the
Access Point 420wl, please see the Management and Configuration Guide,
which is on the Documentation CD-ROM that came with your access point.
To Recover from a Lost Manager Password:
If you cannot start a con-
sole session because of a lost Manager password, you can clear all passwords
and user names by getting physical access to the access point and pressing
and holding the Reset button for a full second. However, note that this action
will reset all configuration settings to the factory defaults.
and user names by getting physical access to the access point and pressing
and holding the Reset button for a full second. However, note that this action
will reset all configuration settings to the factory defaults.