Epic Data Inc MPT9600RFID Manual Do Utilizador
Document Number: 991-101-055 Rev June 7, 2008
Caution
Read the following warnings to avoid potentially hazardous
situations. If you have any additional questions about the
maintenance of your equipment, please contact Epic Data.
situations. If you have any additional questions about the
maintenance of your equipment, please contact Epic Data.
Lithium Battery
This unit contains a non-rechargeable lithium battery. Replace
only with the same or equivalent lithium battery type
recommended by the manufacturer. There is a danger of
explosion when using incorrect batteries. Dispose used
batteries according to the manufacturer’s instructions.
only with the same or equivalent lithium battery type
recommended by the manufacturer. There is a danger of
explosion when using incorrect batteries. Dispose used
batteries according to the manufacturer’s instructions.
Transformer
For use only with the included power supply or certified
equivalent Class 2 power supply:
equivalent Class 2 power supply:
Rated input: 100-240VAC, 1.1A, 50-60Hz
Rated output: 24VDC, 1.67A (40 Watts)
Rated output: 24VDC, 1.67A (40 Watts)
Ensure that the AC power source is not shared with high
current or inductive loads.
current or inductive loads.
Emissions
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area can cause harmful interference requiring correction at the
user’s own expense.
area can cause harmful interference requiring correction at the
user’s own expense.
Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the
equipment.
manufacturer could void the user's authority to operate the
equipment.
The MPT Components
At a minimum, you must have the following items:
MPT device
power supply
USB keyboard and mouse
power supply
USB keyboard and mouse
For maximum reliability, use CAT 5 Ethernet cables less than 100
meters for 100 megabit operation. Other types of wiring may
cause slower connection speeds and/or communication loss.
meters for 100 megabit operation. Other types of wiring may
cause slower connection speeds and/or communication loss.
Power Up
After the MPT is installed, insert power supply plug into MPT
before connecting the transformer into an AC outlet. The MPT
proceeds through its startup cycle. When the startup cycle
completes, a user application should start.
before connecting the transformer into an AC outlet. The MPT
proceeds through its startup cycle. When the startup cycle
completes, a user application should start.
If application does not start when power is connected, press
reset button located on the bottom right hand corner at the
back of the unit.
reset button located on the bottom right hand corner at the
back of the unit.
In the unlikely event that the application does not start, please
contact the Epic Data Service Center.
contact the Epic Data Service Center.
About the Connections
VGA: External VGA display
PS/2 Keyboard and Mouse ports
for backward compatibility
USB: USB 2.0 Ports
10/100 NET: 10/100 BaseT Ethernet
Digital I/O: Attach relays and sense
lines to the MPT. Output capable of
sinking 5V or 12V at 1 amp. The input
handles 5V DC.
SERIAL: EIA-232 Serial port
BARCODE WAND: Barcode wand or
laser scanner port
14-30VDC: Power input
AUDIO OUT: – Audio output
AUDIO MIC: Microphone input