Unitech Electronics Co. Ltd. PA962BTG Manual Do Utilizador
30
Unitech PA962
Changing Communications Settings
If Microsoft ActiveSync fails to detect the PA962 during installation, set up commu-
nications manually instead. Make sure the following conditions are met:
nications manually instead. Make sure the following conditions are met:
To check communications settings,
open the Mobile Devices folder, and
click File => Connection Settings.
open the Mobile Devices folder, and
click File => Connection Settings.
The baud rate on the PA962 is set to
57600bps by default. To adjust the
baud rate, tap Start, Settings, Con-
trol Panel, select the Communication
icon, select the PC Connection Tab,
and then tap the “Change
Connection….” Button. For more
information, see Microsoft ActiveSync
Help.
57600bps by default. To adjust the
baud rate, tap Start, Settings, Con-
trol Panel, select the Communication
icon, select the PC Connection Tab,
and then tap the “Change
Connection….” Button. For more
information, see Microsoft ActiveSync
Help.
Set your baud rate on the PA962 and desktop computer will match it.
Microsoft ActiveSync uses the specified communication ports to connect to
the PA962. Make sure these resources are available for Microsoft ActiveSync
to connect to the PA962. Other programs cannot use them while the PA962
and your desktop computer are connected.
the PA962. Make sure these resources are available for Microsoft ActiveSync
to connect to the PA962. Other programs cannot use them while the PA962
and your desktop computer are connected.
Verify that the correct communications port is selected for your desktop
computer, and that it is free.
computer, and that it is free.
Synchronizing with your computer
Synchronization takes place according to the options you choose while setting
upActivesync on your computer. If you accept the default (On Connect) synchronization
option in the Microsoft ActiveSync Setup Wizard, you'll be able to simply connect
Your PA962 to your desktop computer and synchronization will take place.
upActivesync on your computer. If you accept the default (On Connect) synchronization
option in the Microsoft ActiveSync Setup Wizard, you'll be able to simply connect
Your PA962 to your desktop computer and synchronization will take place.
If you have not enabled the On Connect feature in ActiveSync, you can start
ActiveSync in either of the following ways:
ActiveSync in either of the following ways:
ʳOn your computer, double click My computer > Mobile Devices folder.
ʳConnect the USB cable between the computer and PA962.
ʳConnect the USB cable between the computer and PA962.
Connection options
You can set remote synchronization with your computer using the following
connection options:
- USB connection
connection options:
- USB connection
- Infrared connection
- Bluetooth connection
- WiFi connection
USB Connection
To synchronize with your computer using a USB connection:
To synchronize with your computer using a USB connection:
1. Connect your device to your computer using the USB charging cable.
2. Initiate connection by tapping Start > Settings > Control Panel > PC connection.
3. Select Enable direct connections to the desktop computer using this check box.
4. Tap OK.
2. Initiate connection by tapping Start > Settings > Control Panel > PC connection.
3. Select Enable direct connections to the desktop computer using this check box.
4. Tap OK.