Cidco Communications Corporation CL990 Manual Do Utilizador
INSTALLING YOUR PHONE
6
INSTALLING YOUR PHONE
C
HOOSE
A
L
OCATION
FOR
THE
B
ASE
U
NIT
The base should be away from all other electronic equipment such as a
personal computer, microwave, stereo, or television. It is also a good
idea to place the unit away from noisy areas, or from heat sources such
as a radiator or direct sunlight.
personal computer, microwave, stereo, or television. It is also a good
idea to place the unit away from noisy areas, or from heat sources such
as a radiator or direct sunlight.
P
LUG
IN
THE
A
DAPTER
a). Plug the adapter tip into the round
jack on the base and the other end
into an electrical outlet. Without AC
power your phone cannot operate.
into an electrical outlet. Without AC
power your phone cannot operate.
b.) Thread the cord through the clip on
the housing to prevent the cord
from pulling loose.
from pulling loose.
I
NSTALL
THE
L
INE
C
ORD
You can set your telephone on a tabletop or you can mount the phone on
a wall.
a wall.
To mount on a wall:
a). Remove the
mounting wedge
from the bottom
of the base by
placing your
thumb at the top
of the arrow on
the mounting
wedge and
pressing down in the direction of the arrow.
from the bottom
of the base by
placing your
thumb at the top
of the arrow on
the mounting
wedge and
pressing down in the direction of the arrow.
b.) Turn the wedge around and place it over the lower portion
of the base. Reinstall the wedge by placing your thumb over
the arrow and by pressing downwards and backwards until
it snaps into place.
the arrow and by pressing downwards and backwards until
it snaps into place.
c.) Plug the five inch line cord into the phone jack marked TEL
LINE.
d.) Plug the other end of the line cord into the wall jack.
e.) Use the gap on the underside of the base to gather any
excess cord.
f.) Hang the base over the installation hooks.
SuperManual.book Page 6 Thursday, August 19, 1999 12:50 PM