Agfa Gevaert N V 5364A Manual Do Utilizador
71
2900H EN 20071108
Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
4
Press the Escape key to quit the Key-operator mode.
When the settings have been changed, the ‘accept modifications’ window is displayed:
Each time the settings have been changed and confirmed, an automatic back-up of the
new configuration is made on the hard disk. You will also be asked to create a back-up
floppy.
Select ‘yes’ if you wish to accept the changed settings. Press the Confirm key.
Select ‘no’ if you do not wish to accept the changed settings. Press the Confirm key.
You will return to the Main menu.
After selecting ’yes’, the ‘Update back-up’ screen is displayed:
new configuration is made on the hard disk. You will also be asked to create a back-up
floppy.
Select ‘yes’ if you wish to accept the changed settings. Press the Confirm key.
Select ‘no’ if you do not wish to accept the changed settings. Press the Confirm key.
You will return to the Main menu.
After selecting ’yes’, the ‘Update back-up’ screen is displayed:
If you want to save the configuration on the back-up floppy, select ‘yes’ and press the
Confirm key. The printer will now enter the
Confirm key. The printer will now enter the
(refer to
page
If you only want to save the configuration on the printer hard disk, select ‘no’ and
press the Confirm key.
Next, the following screen is displayed:
press the Confirm key.
Next, the following screen is displayed:
Press the Confirm key to reset. After the reset, the new settings will be active.
Press the Escape key to quit the application. The old settings will remain active until
the next reset.
Press the Escape key to quit the application. The old settings will remain active until
the next reset.