Agfa Gevaert N V 5364A Manual Do Utilizador
79
2900H EN 20071108
Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
Changing the Hostname
1
Perform steps 1 to 2 of the
page
.
2
On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3
In the ‘Network-Dicom’ screen, press the Down key once, followed by the
Confirm key to select ‘Hostname’.
The ‘Hostname’ screen is displayed:
If the Host name has already been assigned, it will be shown on the display.
4
Change the hostname by means of the arrow keys. Refer to
on
page
. Make sure not to enter more than 16 characters.
5
Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
without any changes.
Entries are case sensitive.
e.g. ds5500