Murata Electronics North America 2410G Manual Do Utilizador
Important Regulatory Information
Cirronet Product FCC ID: HSW-2410
G
IC 4492A-2410
G
FCC s MPE Requirements
Information to user/installer regarding FCC s Maximum Permissible Exposure (MPE) limits.
Notice to users/installers using the 24 dBi parabolic dish antenna in conjunction with all Cirronet
RF products.
RF products.
FCC rules limit the use of this antenna, when connected to Cirronet RF products for point-to-point
applications only. It is the responsibility of the installer to ensure that the system is prohibited from
being used in point-to-multipoint applications, omni-directional applications, and applications where there
are multiple co-located intentional radiators transmitting the same information. Any other mode of
operation using this antenna is forbidden.
applications only. It is the responsibility of the installer to ensure that the system is prohibited from
being used in point-to-multipoint applications, omni-directional applications, and applications where there
are multiple co-located intentional radiators transmitting the same information. Any other mode of
operation using this antenna is forbidden.
This module shall not be co-located inside a device with another transmitter. In the case
of location with other devices at a fixed site installation, Users and installers must be
provided with appropriate antenna installation instructions and transmitter operating
conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying
RF exposure compliance
of location with other devices at a fixed site installation, Users and installers must be
provided with appropriate antenna installation instructions and transmitter operating
conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying
RF exposure compliance
.
Note: This unit has been tested and found to comply with the limits for a Class
B
digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their expense.
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their expense.