Murata Electronics North America 5811M Manual Do Utilizador
If the WIT5811 is installed within another device the outside of the device into which the
WIT5811 is installed must also display a label referring to the enclosed module. The label
required for the WIT5811 module is as follows: Transmitter Module FCCID: HSW-5811M.
About This Manual
This manual is designed to allow integration of the Cirronet
This manual is designed to allow integration of the Cirronet
WIT5811 OEM module into
complete products. Care has been taken to try and make sure all of the information in this
manual is accurate. However, specifications can change over time and Cirronet cannot guarantee
the accuracy of this information. If you have any questions on any information in this manual,
please contact Cirronet Technical Support at +1-678 684 2000.
manual is accurate. However, specifications can change over time and Cirronet cannot guarantee
the accuracy of this information. If you have any questions on any information in this manual,
please contact Cirronet Technical Support at +1-678 684 2000.
Note:
This unit has been tested and found to
comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense. Commensurate with EIRP limits
specified in FCC Rules 15.247b, this device may
not be used with antennas that exceed 36dB of
gain in point-to-point applications or 16dB of gain
in multi-point applications.
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense. Commensurate with EIRP limits
specified in FCC Rules 15.247b, this device may
not be used with antennas that exceed 36dB of
gain in point-to-point applications or 16dB of gain
in multi-point applications.
Cirronet
is a trademark of Cirronet Incorporated. All other trademarks belong to their
respective companies.