Murata Electronics North America BT2022M Manual Do Utilizador
Configuring the Network
Network Commands
Network commands are used to set up a HopNet network and to set radio addressing
and configuration.
and configuration.
Command Description
wb[?]
Set Transceiver Mode
0 = remote (default)
1 = base station
wh
Factory serial number high byte.
wm
Factory serial number middle byte.
wl
Factory serial number low byte.
Set Transceiver Mode
Read modem operation as either base station or remote. Default is remote.
Read Factory Serial Number High, Middle and Low Bytes.
These read only commands return one of the three bytes of the unique factory-set
serial number, which are also visible in the startup banner.
serial number, which are also visible in the startup banner.
16 HopNet
110