Murata Electronics North America CCT24 Manual Do Utilizador
Page 75 of 90
CCT24
5.7 DNT Wizard Utility Program
DNT Wizard is a complementary program to DNTDemo that emphasizes the details of serial commu-
nication between a CCT24 and its host computer. The DNT Wizard start-up window is shown in
Figure 5.7.1.
nication between a CCT24 and its host computer. The DNT Wizard start-up window is shown in
Figure 5.7.1.
Figure 5.7.1
DNT Wizard uses three Function keys:
F1 toggles the SLEEP/DTR input to the CCT24 on and off. This allows the CCT24 to be reset.
F2 toggles the RTS input to the CCT24 on and off, providing manual flow control.
F6 toggles test transmissions on and off. The test message is “This is a test”.
F2 toggles the RTS input to the CCT24 on and off, providing manual flow control.
F6 toggles test transmissions on and off. The test message is “This is a test”.
DNT Wizard also includes the ability to log messages to and from the CCT24. This feature is especially
useful in confirming the format of protocol command and reply messages. Control of the log file is under
the View menu. Logging is enabled by default. The log file created is logfile.dat, and is in ASCII text
format. An example log is shown at the end of this section.
useful in confirming the format of protocol command and reply messages. Control of the log file is under
the View menu. Logging is enabled by default. The log file created is logfile.dat, and is in ASCII text
format. An example log is shown at the end of this section.