Murata Electronics North America DNT24 Manual Do Utilizador
www.Murata.com
Technical support +1.678.684.2000
Page 60 of 83
© 2015 by Murata Manufacturing Co. Ltd.
E-mail:
tech_sup@murata.com
DNT24 Integration Guide – 03/04/15
8.0 DNT24DK/DNT24ADK Developer’s Kits
Figure 8.0.1 shows the main contents of a DNT24DK Developer’s kit:
Figure 8.0.1
8.1 Kit Contents
DNT24DK - 2 DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
DNT24DK - 2 patch antennas and two 2 dBi dipole antennas with MMCX/RSMA adaptor cables
DNT24ADK - 2 DNT24PA radios installed in DNT24 interface boards, labeled Base and Remote
All Kits - 2 wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC (not show
above)
above)
All Kits - 2 RJ-45/DB-9F cable assemblies and two A/B USB cables
All Kits - 1 DNT24DK/DNT24ADK documentation and software CD
8.2 Additional Items Needed
To operate the kit, the following additional item is needed:
One PC with Microsoft Windows XP, Vista or Windows 7 operating system. The PC must be
equipped with a USB port or a serial port capable of operation at 9600 bps.
equipped with a USB port or a serial port capable of operation at 9600 bps.
8.3 Developer’s Kit Default Operating Configuration
The default operating configuration of the DNT24DK developer’s kit is point-to-point with transparent
serial data at 9600 bps, 8N1. One DNT24 is preconfigured as a base and the other as a remote. Labels
on the bottom of the interface boards specify Base or Remote.
serial data at 9600 bps, 8N1. One DNT24 is preconfigured as a base and the other as a remote. Labels
on the bottom of the interface boards specify Base or Remote.