Murata Electronics North America HN1010 Manual Do Utilizador
HN-1510 Outdoor Base/Remote Station
M-2410-0010, Rev -
HopNet Family of Products
13
HN-1510 Outdoor Base/Remote Station
Introduction
The HopNet Indoor Base/Remote Station (HN-1510) features a rugged, compact,
enclosure for indoor or harsh industrial environments.
enclosure for indoor or harsh industrial environments.
Data Transmission
The HN-1510 supports up to 62 remotes on a single network, with up to 16 different
networks in the same area. The HN-1510 can usually transmit over a range of 300 to
1000 feet indoors with obstructions. You can extend this range by adding a HopNet
Repeater (HN-2010) or using gain antennas.
networks in the same area. The HN-1510 can usually transmit over a range of 300 to
1000 feet indoors with obstructions. You can extend this range by adding a HopNet
Repeater (HN-2010) or using gain antennas.
The automatic repeat requests (ARQ) and multinode protocol are transparent to the
user equipment. User data rates of 230 Kbps are supported with built-in CRC/ARQ
error protocols. Data signals are EIA RS-232 standard for Data Communications
Equipment (DCE) devices.
user equipment. User data rates of 230 Kbps are supported with built-in CRC/ARQ
error protocols. Data signals are EIA RS-232 standard for Data Communications
Equipment (DCE) devices.
Data and control of the radio are passed through a standard DB9 connector. See the
following illustration for the signal description.
following illustration for the signal description.
9 Not Used
8 Clear to Send (CTS)
7 Request to Send (RTS)
6 Data Set Ready (DTR)
5 Ground
4 Not Used
3 Transmit Data (TX)
2 Receive Data (RX)
1 Data Carrier Detect (DCD)