Murata Electronics North America SEM2410 Manual Do Utilizador
2000, 2001 Cirronet
Incorporated
9 022101
DHCP
A DHCP server also can be used to set the SEM IP address as well as the default route IP
address. This is accomplished by setting the desired default route IP address in the DHCP
server using Option 3. A DHCP server will not overwrite a previously entered default
router IP address in the SEM. If a DHCP server is not used to set the default router IP
address, one must be entered using the route command. See the previous section for
details of the route command.
A DHCP server also can be used to set the SEM IP address as well as the default route IP
address. This is accomplished by setting the desired default route IP address in the DHCP
server using Option 3. A DHCP server will not overwrite a previously entered default
router IP address in the SEM. If a DHCP server is not used to set the default router IP
address, one must be entered using the route command. See the previous section for
details of the route command.