Murata Electronics North America SEM2410 Manual Do Utilizador
2000, 2001 Cirronet
Incorporated
5 022101
Store the changed configuration parameters in non-volatile memory with the save
command:
save<CR>
The SEM will report back the time it took to the save the information. Reset the SEM by
typing:
typing:
reset<CR>
The SEM can also be reset by cycling power. Whenever a reset is executed on the SEM,
the telnet session will be lost. It will take the SEM about 30 seconds to reinitialize after a
reset or after cycling power.
Note: Failure to save and reset will result in the factory defaults being used.
the telnet session will be lost. It will take the SEM about 30 seconds to reinitialize after a
reset or after cycling power.
Note: Failure to save and reset will result in the factory defaults being used.