Murata Electronics North America Z2405HPA Manual Do Utilizador
RF Exposure
For ZigBee products with “Mobile Grants”. In accordance with FCC requirements of human
exposure to radiofrequency fields, the radiating element shall be installed such that a minimum
separation distance of 20 cm shall be maintained from the user and/or general population.
Only antennas approved by the FCC for these modules may be used. Contact RFM for details.
For ZigBee products with “Portable Grants”. In accordance with FCC requirements of human
exposure to radiofrequency fields, the radiating element of there devices can be installed such
that a separation distance of 2.5 cm or less can be maintained from the user and/or general
population. (See Appendix 1 at the end of this document) These products have an intergraded
antenna on the module which must not be removed.
exposure to radiofrequency fields, the radiating element shall be installed such that a minimum
separation distance of 20 cm shall be maintained from the user and/or general population.
Only antennas approved by the FCC for these modules may be used. Contact RFM for details.
For ZigBee products with “Portable Grants”. In accordance with FCC requirements of human
exposure to radiofrequency fields, the radiating element of there devices can be installed such
that a separation distance of 2.5 cm or less can be maintained from the user and/or general
population. (See Appendix 1 at the end of this document) These products have an intergraded
antenna on the module which must not be removed.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference Causing
Equipment Regulations. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Equipment Regulations. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de
l'interférence canadienne causant des règlements d'équipement. L'opération est sujette
aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive,
et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence canadienne causant des règlements d'équipement. L'opération est sujette
aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive,
et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence qui peut causer l'opération peu désirée.
Suggested End Product Labeling
The final end product must be labeled in a visible area on the exterior of the enclosure with the
following or similar text: “Contains TX FCC ID: (use correct ID from table above)”
European Union
All ZigBee modules conform to the requirements of ETSI EN 300 328 standard for radiated
emissions.