Murata Electronics North America Z2430A Manual Do Utilizador

 is a read-only register that provides information about the device’s link status. 

(Update button refreshes Link Status.) 
 

LinkStatus Value  Description 
0x01 

0x04 

Device has joined but is not yet authenticated by the Trust Center 

0x05 

Device has been authenticated and has joined the network as an End Device 

0x06 

Device has been authenticated and has joined the network as a Router 

0x08 

Device has started a network as the coordinator 

 

 

The Channel Set selects the RF channel(s) the module can use. Any number can be checked 
or unchecked as long as at least one channel is selected. If no channels are selected, when you 
click on Apply, an error message will display. Simply click in a box to add a check mark. Clicking 
on a box that already has a checkmark will remove it. The Coordinator listens on the first 
channel of the channel(s) that have been specified in the Channel Set field. If it detects RF 
energy on that channel above the Network Formation Threshold level, it moves to the next 
channel in the channel set list until it finds a clear channel. Once a channel has been found, text 
will display in the Status text window in the lower right part of the main ZBDemo window 
indicating that a network has been formed. If a clear channel cannot be found, the Link LED will 
not be lit and no text will display in the Status text window. Once a clear channel has been 
found, the Coordinator will listen for other devices seeking to associate. See Section 8 for a 
more detailed explanation.