Murata Electronics North America Z2430HPA Manual Do Utilizador

After completing the steps, the Router information will be displayed in the Local Radio column 
and the Coordinator information will be displayed in the Radio 1 column as shown below. 

 

 

 
There are Poll Radio checkboxes at the bottom of each Radio column that enable periodic 
polling of the radio’s parameters. In order to see changes made to the state-change devices on 
the development board, turn on continuous polling by clicking the Start button under the Refresh 
Delay field. A setting of 0 seconds in the Refresh Delay field will continuously poll the Radios 
with the Poll Radio box checked. Longer Refresh Delay settings can be set using the up and 
down arrows to the right of the Refresh Delay field, or the number can be highlighted and a 
value entered. Once the Start button is pressed, it changes to a Stop button. Clicking on the 
Stop button will end the polling process.