Senstar Corporation LM100 Manual Do Utilizador

2. Specify the device firmware being updated and select OK (i.e., MSP for gateway, Heads for 

luminaires, GSM Base for wireless gate sensor receiver, GSM Sensor for gate sensor 
module).

3. Select the Use: Current Active configuration after programming unit radio button, then select 

the Browse button.

4. Navigate to the location of the firmware file and select the appropriate .XDU file.

If you select an incorrect .XDU file, the UCM will not allow the installation.

5. Select the Program button on the Program Device dialog.

A series of progress windows will be displayed as the firmware is loaded into the devices.

6. When the programming Complete window is displayed, select OK.
7. Reset or restart the gateway. 

Figure 59: Target Filters

high pass filter

low pass filter