ZyXEL Communications Corporation EMG1302R10A Manual Do Utilizador
EMG1302-R10A User’s Guide
75
C
H A P T E R
8
Wireless LAN
8.1 Overview
This chapter discusses how to configure the wireless network settings in your EMG1302-R10A. See
the appendices for more detailed information about wireless networks.
the appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 35
Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your EMG1302-R10A is the AP.
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your EMG1302-R10A is the AP.
8.2 What You Can Do
• Use the General screen to enter the SSID, select the channel, and configure wireless security
(
).
• Use the More AP screen to enable and configure multiple wireless networks (
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the EMG1302-R10A (
).
• Use the Advanced screen to allow intra-BSS network and set the RTS/CTS Threshold (