ZyXEL Communications Corporation NBG4104 Manual Do Utilizador
Chapter 20 Remote Management
NBG4104 User’s Guide
123
20.5 The Telnet Screen
You can use Telnet to access the NBG4104’s command line interface. Specify which interfaces allow
Telnet access and from which IP address the access can come.
Telnet access and from which IP address the access can come.
Click Configuration > Management > Remote MGMT > Telnet to display the screen as shown.
Figure 63
Configuration > Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
Secured Client IP
Address
Address
Select All to allow all computers to access the NBG4104.
Otherwise, check Selected and specify the IP address of the computer that can access
the NBG4104.
the NBG4104.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
Table 49
Configuration > Management > Remote MGMT > WWW (continued)
LABEL
DESCRIPTION
Table 50
Configuration > Management > Remote MGMT > Telnet
LABEL
DESCRIPTION
TELNET
Server Port
You may change the server port number for a service if needed. However you must use
the same port number in order to use that service for remote management.
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the NBG4104 using this
service.
service.
Secured Client IP
Address
Address
Select All to allow all computers to access the NBG4104.
Otherwise, check Selected and specify the IP address of the computer that can access
the NBG4104.
the NBG4104.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.