ZyXEL Communications Corporation NBG417N Manual Do Utilizador
Chapter 6 Tutorials
User
’s Guide
68
4
To create a custom QoS setting for a specific game, enter the following
information in the first available custom Priority Queue line:
information in the first available custom Priority Queue line:
Service: This is the name by which your custom service is labled. It can be
anything with the limitation that it cannot be longer than 10 characters.
anything with the limitation that it cannot be longer than 10 characters.
Priority: Set this to High.
Specific Port: From the list, select the communication protocol your game uses.
In this example, our game uses TCP/IP so we choose TCP. If you are not sure,
then select Both. Enter the starting port in the first port range box, then enter
then last port in the second port range box. For our game, we used 6112 to 6119.
In this example, our game uses TCP/IP so we choose TCP. If you are not sure,
then select Both. Enter the starting port in the first port range box, then enter
then last port in the second port range box. For our game, we used 6112 to 6119.
5
Click Apply to save your changes, then exit the Web Configurator.
6.4 Set Up a Wireless Network with WPS
This section gives you an example of how to set up wireless network using WPS.
This example uses the NBG4115 as the AP and NWD210N as the wireless client
which connects to a notebook.
This example uses the NBG4115 as the AP and NWD210N as the wireless client
which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB
adapter or PCI card).
There are two WPS methods for creating a secure connection. This tutorial shows
you how to do both.
you how to do both.
• Push Button Configuration (PBC) - create a secure wireless network simply
by pressing a button. See
Section 6.4.1 on page 68
.This is the easier method.
• PIN Configuration - create a secure wireless network simply by entering a
wireless client's PIN (Personal Identification Number) in the NBG4115’s
interface. See
Section 6.4.2 on page 70
. This is the more secure method, since
one device can authenticate the other.
6.4.1 Push Button Configuration (PBC)
1
Make sure that your NBG4115 is turned on and that it is within range of your
computer.
computer.
2
Make sure that you have installed the wireless client (this example uses the
NWD210N) driver and utility in your notebook.
NWD210N) driver and utility in your notebook.
om
pan
y
on
fiden
tial