ZyXEL Communications Corporation VMG1312B10C Manual Do Utilizador

 Chapter 5 Broadband

VMG1312-B10C User’s Guide

Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want 
to edit. The screen shown next appears.

802.1x: Add/Edit

The following table describes the labels in this screen.  

If you are using an ethernet WAN connection, you can configure a LAN port as an ethernet WAN 
port. Click Network Setting > Broadband > Ethernet WAN to open this screen.

Note: LAN port 4 can operate as an Ethernet WAN port.

802.1x: Add/Edit

Active

This field allows you to activate/deactivate the authentication.

Select this to enable the authentication. Clear this to disable this authentication without 
having to delete the entry.

Interface

This field displays where there is an interface available to select for the 802.1X 
authentication settings. Select the interface to which to apply the 802.1X authentication 
settings.

EAP Identity

Enter the EAP identity of the authentication.

EAP method

This is the EAP method used for this authentication.

Enable 
Bidirectional 
Authentication

Select this to allow bidirectional authentication.

Certificate

Select the certificate you want to assign to the authentication. You need to import the 
certificate in the Security > Certificates > Local Certificates screen.

Trusted CA

Select the Trusted CA you want to assign to the authentication. You need to import the 
certificate in the Security > Certificates > Trusted CA screen.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.