ZyXEL Communications Corporation VMG1312T10C Manual Do Utilizador

Chapter 7 Home Networking

VMG1312-T10C User’s Guide

The following table describes the labels in this screen. 

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for 
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a 
network, obtain an IP address, convey its capabilities and learn about other devices on the network. 
In turn, a device can leave a network smoothly and automatically when it is no longer in use.

See 

 for more information on UPnP.

Use the following screen to configure the UPnP settings on your Device. Click Network Setting > 
Home Networking > Static DHCP > UPnP to display the screen shown next.

Network Setting > Home Networking > UPnP

The following table describes the labels in this screen.

Network Setting > Home Networking > IP Alias 

IP Alias 

Select Enable to configure a LAN network for the Device.

IP Address

Enter the IP address of your Device in dotted decimal notation. 

Subnet Mask

Your Device will automatically calculate the subnet mask based on the IP address that 
you assign. Unless you are implementing subnetting, use the subnet mask computed by 
the Device.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Network Settings > Home Networking > UPnP

UPnP

Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to 
open the web configurator's login screen without entering the Device's IP address 
(although you must still enter the password to access the web configurator).

Apply

Click Apply to save your changes.

Cancel

Click this to restore your previously saved settings.